Water is the biggest threat any oil lubricated system faces. Depending on the application water can cause serious problems for the equipment or safety. Maintain and protect your equipment by monitoring the water content.
Most parameters can be trended well by offline laboratory oil tests. This is not the case when it comes to water ingress. Water is not a by-product of the aging of oil or a result of the usage of the oil. Water ingress can come quickly and without any prior warning. Once established water levels may rise very fast. Therefore a trend analysis in a shore based laboratory does not allow a close enough monitoring of the water content to avoid problems due to a sudden water ingress.
Your benefits:
All parts (sensor, display, battery pack etc.) can be exchanged when needed
Now 30% bigger backlit display for better visibility
Solid rugged metal housing for higher durability
Multiple ranges for exact readings
Multilingual software
No hazardous reagents needed
Undercut in the bottom to assist dosing the chemicals for all tests
The newly developed Electronic Water in Oil TouchCell does provide highest accuracy on site when testing Water in Oil giving results after a few minutes.
Prevent corrosion, cavitation or failure of your machinery by detecting water in oil, before any damage occurs.
Minimize instability of additive packages and damaging microbe growth by monitoring your oil.
Ordering Information
OTK-CT-11201
Electronic Water in Oil Test Kit
| Range: | 0 – 1500 ppm, (lowest reading 100 ppm) |
| 0 – 6000 ppm, (lowest reading 200 ppm) | |
| 0 – 1 %, 0 – 5 % | |
| Accuracy: | +/- 0.01 % free water |
| Weight: | 490 g |
| Test time: | 5 minutes |
| Reagents: | non hazardous |
| Memory: | last 10 readings for each individual oil |
OTS-CT-13001
Water TouchCell
OTS-CT-13004
Set of O-Rings for TouchCell
SW-C00004-CT
Download Option TouchCell
License for data download
